July 9, 2009

Recording interviews with field recorders

In the last 2 weeks, I’ve recorded several interviews at 2 different trade shows. Those interviews have ended up in episodes of both Shutters Inc and Sine Lanugage.
In the wake of this, I’ve had a couple of enquiries from listeners as to my technique for recording interviews on flash-based field recorders like the Zoom H2.
These listeners have commented that they never seem to achieve the same level of results as I have managed, and have asked for some insights.
So, I shall endeavour to outline the pitfalls as I understand them.

First off, tempting though it may be, do not record to mp3!
Remember, mp3 is a lossy format, and we don’t ever want to save production audio (clips which still need further work before release) in a lossy format.
And for that matter, don’t record at 16 bit wav either.
No, your preferred option is to record 24 bit wav.
Yes, it will chew up your memory cards quicker, but memory cards are really not that expensive these days, so carrying a couple of extras shouldn’t represent too much of a burden, either physically or financially.
If your recorder of choice does not offer 24 bit wav, then fall back to recording 16 bit wav instead.

Secondly, your recorder SHOULD offer a choice of microphone gain sensitivities.
The Zoom H2 offers low, medium and high.
Low will turn the sensitivity down (useful for really loud sources), medium is what it sounds like, and high turns the sensitivity up (for really quiet sound sources).
I have found that the medium setting usually works well for these trade show interviews, but obviously, judge each on a case by case basis.
Remember, we are recording at 24 bit, so we don’t NEED to peg the meters at zero!
Peaks of -20dB to -12dB are just fine!

Third, if your recorder of choice has a headphone output (I don’t imagine there’d be any which do not, but you never know), then absolutely have some form of monitoring with you when you are recording.
This may be a set of lightweight street headphones, or even a decent set of earbuds.
Me? I use my trusty old Sennheiser CX300′s, with just one earbud stuck in one ear.
The reason for that is that through that ear, I can hear what the microphone is picking up, and through my other ear, I’m hearing the world around me.

Now, because you are monitoring (via your earbud) what the microphone of the recorder is hearing, you are able to move the recorder around as necessary througout the interview to make sure the talent stays ‘on mic’.
Now, you might be thinking that people aren’t going to like having a flash recorder stuck in (and moving around in front of) their face.
I would contend that if they have agreed to do an interview, then they are probably going to be ok with it.
My technique is to hold the recorder at chest height between myself and the talent.
That way, you SHOULDN’T get any plosives (pops), but the mic should be able to hear the talent fairly well, while keeping the ambient noise reasonably under control.
If you talent is a very soft speaker, then you may have to move the recorder closer toward them, and that may feel a little uncomfortable at first.
If the talent keeps backing away from the mic, stop the interview, explain to them that you NEED the mic that close in order to hear what they are saying without being drowned by background noise, then recommence the interview.
Thing is, MOST of the time, the person you’ll be interviewing is from the marketing department or the sales team and they generally don’t speak that quietly!!

OK, so now you’re back at your desktop (or in your hotel room working on your laptop) and ready to edit and mix.
Drag the files into your DAW of choice.
DO NOT go and normalise the waveforms!
Remember, they’re 24 bit files, so it’s all good.
In your multitrack (which is also mixing at 24 bits or higher, right? RIGHT??), lay up your interviews where you want them.
Adjust the gain so you’ve got peaks around -20dBFS to -15dBFS off each channel. At this point, you should have NO processing on your master output.
Put in some per channel automation to keep each interview roughly in the bacllpark in terms of output level. You don’t have to get too finicky with it, just ‘in the ballpark’ will be good enough at this stage.
Now, if your final audio piece is going to feature other pieces of audio as well, I’d suggest setting up a submix (buss) for just the interviews to go through.
Then, slap a peak limiter across that buss with an output level set for -15dBFS, and the threshold set so that you’re getting about 4-6dB of gain reduction on that peak limiter.
Then, AFTER the peak limiter, put a compressor with a moderate attack (~20-30ms), moderate release (~100-150ms), a medium ratio (3:1-5:1) and again, enough threshold to give you another 3-6dB of gain reduction.
Your interview submix should now be exhibiting tightly controlled dynmaics, but not sounding squashed.
Go ahead and mix it in with all your other audio bits so that everything sounds roughly equal in apparent volume.
Slap a peak limiter across your master output, and you should be cookin’ with gas!
Have fun!

m4s0n501

July 5, 2009

Sine Language – episode 114

In ep 114, how NOT to attend a trade show,
my man in Hollywood gets back to us on track laying for motion picture,
and JR asked about the best way to record some character interviews outside of the ideal studio environment.

A couple of links for you:

FMR Audio (makers of the RNC compressor)
The Wiki article on dBm,
the Wiki article on decibels,
the Wiki article on Dolby Surround (including info on LtRt), and
the Wiki article on downmixing (which also includes info on LtRt).


February 22, 2009

Sine Language – episode 106

This week, Jay asked about the audio processing used in movie soundtracks, and why the music in movies sounds so much better than the official soundtrack CD.
Scott Hess asked about using small amounts of delay to simulate spatial shifts, rather than using straight out panning.
And Greg Anderson wanted some feedback (from YOU as well as me) about creating a short list of technical ‘goals’ for personnel recording live lectures and conferences.
By the way, there probably WON’T be an episode of Sine Language next week, as I really want to get an ep of Building The Pod done. Just letting you know now, ok?


April 15, 2007

Sine Language – episode 053

Bruce’s torture at the hands of podcasting cowboys, royalty free production music, a couple of voice comments about the M-Audio MobilePre, a discussion on telephone hybrids, and acoustic treatment for the podcast “road warriors” out there!